GENERAL| SPECS | |
| MANUAL
STEERING |
Ratio| 24 to 1 | |
Lubricant| SAE 80 Multipurpose Gear Lubricant | |
| Adjustments Worn Bearing Preload Over
Center Adjustment Pitman Shaft Adjusting Screw End Clearance ------ ½ to 7/8 lbs. 1 ½ to 2 lbs. .002
in. max. | |
| POWER STEERING |
| Ratio | 17.5
to 1 |
| Lubrication LubricantCapacity-Complete System Capacity- Pump Only ----- GM Hydra-Matic Fluid 1 ¾ Qts. 1 Qt. | |
| Adjustments Ball Preload Thrust
Bearing Preload Over-Center Adjustment | ----- ½ to 5 in. lbs. 1 to 3 in. lbs. In excess of initial
load 4 to 8 in. lbs. In excess of combined ball and thrust bearing preload |
TORQUE| SPECIFICATIONS | |
| APPLICATION | FT. LBS. |
| STEERING LINKAGE Idler Arm Support to Frame Bolt Tie Rod Clamp Bolts Tie Rod to Plain Arm and Relay
Rod Nuts Steering Wheel Nut ------ 25 to 25 20 to 25 50 to 60 25 min. and Stake | |
| MANUAL STEERING GEAR Gear to Frame Bolts Pitman Shaft Nut Side Cover Bolts | ----- 60
to 80 90 to 120 20 to 22 |
| POWER STEERING PUMP Pulley Nut Pump Bracket to Cylinder
Head Pump Bracket to Intake Manifold and to Pump Pump Mounting Stud Union Flow Control Valve Plug | ----- 35
to 45 20 to 40 20 to 28 25 to 35 25 to 35 4 |
